SolarSense 100-LED Outdoor Motion Sensor Wall Light

The Zynqle SolarSense 100-LED Outdoor Motion Sensor Wall Light combines solar charging, PIR motion detection, and three adjustable lighting modes in a compact exterior fixture.

A monocrystalline solar panel charges the integrated 2200mAh lithium battery, while the 120° PIR sensor detects movement from approximately 8–10 meters away.

Three lighting behaviors allow SolarSense to operate as a motion-activated light, a dim light that brightens when movement is detected, or a continuous medium nighttime light.

Its wire-free wall-mounted design makes it practical for entrances, garden gates, pathways, courtyards, patios, and other outdoor spaces with access to daytime sunlight.

100-LED Lighting Array

The light uses 100 SMD LEDs arranged across the front lighting sections.

PIR Motion Detection

The sensor provides a 120° detection angle with a stated range of approximately 8–10 meters.

Three Lighting Modes

Choose motion-only operation, dim lighting with motion-triggered brightness, or steady medium lighting.

Monocrystalline Solar Panel

A 5.5V, 1.43W solar panel provides daytime charging.

2200mAh Rechargeable Battery

The integrated 18650 lithium battery stores solar energy for nighttime operation.

Weather-Resistant Outdoor Design

The housing is designed for outdoor wall installation.

Wire-Free Operation

No household electrical wiring is required.

Compact Wall-Mounted Form

The approximately 5.1-inch-wide housing provides outdoor illumination without a large fixture footprint.

Light Outdoor Areas Without Running Wires

Solar power allows the light to operate independently from household electrical wiring.

Add Automatic Illumination

The PIR motion sensor activates brighter lighting when movement is detected according to the selected mode.

Choose How the Light Behaves at Night

Three operating modes let you choose between motion-only lighting, low-level illumination with motion boost, or continuous medium light.

Reduce Manual Switching

The integrated light-sensing system supports automatic daytime charging and nighttime operation.

Place Lighting in More Locations

The compact solar design can be installed around gardens, walls, gates, patios, courtyards, and other sun-exposed outdoor spaces.

Recharge From Sunlight

The monocrystalline panel replenishes the internal 2200mAh battery during daylight without routine connection to household power.

Product Model

Product Information: W-100LED

LED Configuration

Product Information: 100 SMD2835 LEDs

LED Rating

Product Information: 0.2W per LED specification

Body Material

Product Information: PC + ABS

Solar Panel Type

Product Information: Monocrystalline silicon

Solar Panel Rating

Product Information: 5.5V / 1.43W

Battery Type

Product Information: 18650 lithium battery

Battery Rating

Product Information: 3.7V / 2200mAh

Battery Protection

Product Information: Charge and discharge protection

Output Power

Product Information: 3.2V / 7W

Charging Time

Product Information: Approximately six hours in sunlight

PIR Sensing Angle

Product Information: 120°

Motion Detection Distance

Product Information: Approximately 8–10 meters

Lighting Modes

Product Information: Three

Product Dimensions

Product Information: 13 × 9.5 × 5 cm

Approximate Product Dimensions

Product Information: 5.1 × 3.7 × 2.0 inches

Construction Materials

Product Information: Plastic and metal

Selected Pack Quantity

The package includes the number of SolarSense wall lights selected through the pack-size variant.

Outdoor Locations

SolarSense is designed for exterior walls, garden gates, outdoor corridors, patios, courtyards, roof terraces, entrances, and similar outdoor spaces.

Solar Charging

Installation requires access to sufficient daylight for the integrated solar panel.

Motion Detection

The PIR system provides a stated 120° sensing angle and approximately 8–10 meters of sensing distance.

Power System

The light operates from its integrated solar panel and rechargeable lithium battery and does not require household electrical wiring.

Choose a Sun-Exposed Location

Select an outdoor wall where the solar panel can receive adequate direct sunlight during the day.

Position the Light

Place the unit where the PIR sensor has a clear view of the area you want to monitor.

Secure It to the Wall

Attach the light to a suitable wall using two screws.

Keep the Solar Panel Clear

Avoid placing the unit directly beneath overhangs, dense foliage, or other objects that substantially block daytime sunlight.

Select a Lighting Mode

After installation, use the front control to select the preferred nighttime operating mode.

Charge in Sunlight

Install SolarSense where the integrated solar panel can receive direct sunlight. The stated full charging period is approximately six hours of sunlight.

Turn On the Light

Use the front-mounted control to activate the light and select the desired operating mode.

Choose Motion Sensor Mode

Select this setting when you want the light to remain off until motion is detected.

Choose Dim + Motion Mode

Select this setting when you want low-level nighttime illumination that increases when movement is detected.

Choose Continuous Medium Light Mode

Select this setting when steady nighttime illumination is preferred.

Allow Automatic Nighttime Operation

The integrated light-sensing system manages operation between daytime charging and nighttime lighting.

Front Entrances

Motion sensing provides automatic light around doors and entry areas after dark.

Garden Gates

Solar operation makes the light practical for exterior locations where running electrical wiring would be inconvenient.

Pathways and Outdoor Corridors

Automatic nighttime lighting can improve visibility around frequently used outdoor routes.

Patios and Courtyards

The compact wall-mounted design provides convenient solar lighting around outdoor living areas.

Garden and Boundary Walls

SolarSense can be mounted directly to sun-exposed walls without a wired electrical connection.

Roof Terraces

The solar-powered design is suitable for exterior areas with adequate daytime sunlight.

Shops and Small Business Entrances

Motion-activated illumination can provide convenient nighttime lighting around storefront entrances and exterior walls.

Shipping

Ships from our U.S. warehouse.

Estimated processing time is approximately 1–3 business days for most orders.

Estimated delivery time is approximately 3–7 business days.

Delivery estimates can vary depending on destination, inventory availability, carrier conditions, holidays, weather, and address accuracy.

Returns

Returns are handled according to Zynqle's published Returns & Refunds Policy.

How does SolarSense charge?

The built-in monocrystalline solar panel converts sunlight into energy stored in the internal rechargeable lithium battery.

How long does charging take?

The stated charging time is approximately six hours in direct sunlight.

Does the light require electrical wiring?

No. SolarSense operates from its integrated solar panel and rechargeable battery.

Does it detect motion?

Yes. The built-in PIR motion sensor has a stated 120° sensing angle.

How far can the motion sensor detect movement?

The stated sensing distance is approximately 8–10 meters, or roughly 26–33 feet.

How many lighting modes are available?

SolarSense provides three operating modes.

What happens in motion sensor mode?

The light remains off when no movement is detected and switches to bright illumination when motion is detected.

What happens in dim + motion mode?

The light remains at a lower brightness level and becomes brighter when movement is detected.

Can it stay illuminated continuously at night?

Yes. One mode provides steady medium-level lighting after dark.

How many LEDs does the light use?

The light contains 100 SMD2835 LEDs.

What type of battery does it use?

It uses a 3.7V 2200mAh 18650 lithium battery with charge and discharge protection.

Is it designed for outdoor use?

Yes. The product is designed for outdoor wall installation and weather exposure.