4-piece blue car interior LED atmosphere light kit

4-Piece Car Interior LED Atmosphere Lights – Blue Ambient Lighting Kit with Cigarette Lighter Plug, 360° Adjustable

$19.00 USD

Give your car interior a clean, ambient glow with this 4-piece LED atmosphere light kit. Four slim translucent light bars mount anywhere inside your vehicle using the included double-sided adhesive tape, and the entire set runs off a single cigarette lighter plug — no wiring, no drilling, no permanent modifications.

Each light bar rotates 360° so you can angle the blue LED glow exactly where you want it — under the dashboard, along door panels, beneath seats, or across the center console. A single on/off button on the cigarette lighter plug controls all four lights at once, keeping operation simple while you drive.

The translucent ABS and resin housing diffuses the light evenly for a soft, consistent ambient effect rather than a harsh spotlight. Compatible with any DC 12V vehicle including cars, SUVs, and trucks. Total cable length of 12.5 ft gives you enough reach to position all four lights throughout the cabin.

This 4-piece car interior LED atmosphere light kit includes four slim translucent ABS and resin light bars that emit blue LED light, connected via a wired harness to a single DC 12V cigarette lighter plug. Each light bar features 360° rotation for directional adjustment and mounts with double-sided adhesive tape. All four lights are controlled by a single on/off button on the cigarette lighter plug. Total cable length is approximately 12.5 ft (4.6 ft + 7.9 ft split). Compatible with DC 12V vehicles.

4 slim LED light bars in one kit — all powered from a single cigarette lighter plug
Blue LED light color with soft, diffused output from translucent ABS and resin housing
360° rotation on each light bar for flexible directional adjustment
Double-sided adhesive tape on each light for secure, damage-free mounting
Single on/off button on the cigarette lighter plug controls all 4 lights simultaneously
Total cable length: approx. 12.5 ft (4.6 ft + 7.9 ft) for flexible cabin placement
No wiring or permanent installation required — plug-and-play setup
Compatible with DC 12V vehicles: cars, SUVs, trucks

Adds ambient interior lighting without any permanent wiring or vehicle modification
Single plug powers all 4 lights — no need for multiple power sources or adapters
360° adjustable angle lets you customize the lighting direction for each light bar
Adhesive mount means no drilling or tools needed for installation
One-button control keeps operation simple and distraction-free while driving
Soft blue diffused glow creates a relaxed ambient atmosphere without harsh glare

Material: ABS + Resin (translucent housing)
Power input: DC 12V / 80mA
Light color: Blue
Quantity: 4 light bars per set
Single light bar size: 10 x 2 x 1.5 cm / 3.93 x 0.79 x 0.59 in (L x W x H)
Cable length: 1.4m (4.6 ft) + 2.4m (7.9 ft) split harness
Total cable reach: approx. 12.5 ft
Rotation: 360° adjustable per light bar
Mounting: Double-sided adhesive tape (included)
Power source: Cigarette lighter socket (12V)
Item total weight: 104g / 0.23 lbs
Package size: 22 x 18 x 3.5 cm / 8.66 x 7.09 x 1.38 in
Package weight: 140g / 0.31 lbs

4× LED atmosphere light bars (translucent ABS/resin)
1× Cigarette lighter plug with on/off button and wired harness
Double-sided adhesive tape pre-applied to each light bar

Compatible with any vehicle equipped with a standard DC 12V cigarette lighter socket, including cars, SUVs, trucks, and minivans. Not compatible with 24V vehicles (e.g. some commercial trucks and heavy vehicles). The adhesive mount works best on smooth, clean, non-porous interior surfaces such as plastic trim panels and dashboards. Adhesion may vary on textured, fabric, or curved surfaces.

No tools or wiring required. Each light bar mounts via pre-applied double-sided adhesive tape. Clean the mounting surface, peel the tape backing, press the light bar firmly in place, and route the cable to the cigarette lighter socket. The entire set installs in minutes with no permanent modifications to the vehicle.

Plan your placement — decide where you want each of the 4 light bars inside your vehicle (dashboard, door panels, footwells, etc.).
Clean and dry the mounting surface thoroughly before applying the adhesive tape.
Peel the backing from the double-sided adhesive tape on each light bar and press firmly onto the chosen surface. Hold for 10–15 seconds for a secure bond.
Route the cable harness neatly along the interior trim to the cigarette lighter socket.
Insert the cigarette lighter plug into your vehicle’s 12V socket.
Press the button on the plug to turn all 4 lights on or off.
Rotate each light bar up to 360° to adjust the direction of the glow as desired.

Under-dashboard ambient lighting
Door panel and footwell accent lighting
Center console and cup holder area lighting
Rear seat ambient lighting for passengers
Drivers who want a custom interior look without permanent modifications
Cars, SUVs, and trucks with a standard 12V cigarette lighter socket

Ships to the United States. Processing time is typically 1–3 business days. Delivery times vary by shipping method selected at checkout. Returns are accepted within 30 days of delivery for items in original, unused condition. Please contact our support team to initiate a return.

This product is covered by our standard store warranty. If you receive a defective or damaged item, please contact us within 30 days of delivery with your order number and photos of the issue. We will arrange a replacement or refund in accordance with our returns policy.

Will this fit my car’s cigarette lighter socket?

Yes, as long as your vehicle has a standard DC 12V cigarette lighter socket. This kit is not compatible with 24V vehicles.

Can I control each light individually?

No. All 4 lights are wired to a single harness and controlled by one on/off button on the cigarette lighter plug. They turn on and off together.

Will the adhesive tape damage my car’s interior?

The double-sided adhesive tape is designed for interior plastic surfaces. Removal may leave residue on some surfaces. Test on a small area first if you are concerned about your specific interior material.

Is the cable long enough to reach all 4 corners of the cabin?

The total cable length is approximately 12.5 ft split across two cable runs (4.6 ft and 7.9 ft). This is sufficient for most standard car interiors when routing from the cigarette lighter socket.

Does this only come in blue?

This listing is for the blue LED version. Check the product page for any additional color options that may be available.

Why Choose This Atmosphere Light Kit?

4 lights in one kit — covers the full cabin vs. single-light alternatives
Single cigarette lighter plug powers all 4 — no need for multiple adapters or USB ports
360° rotation — more directional flexibility than fixed-angle LED strips
Adhesive mount with no wiring — easier to install and remove than hardwired kits
12.5 ft total cable — longer reach than many compact 2–3 ft single-light kits